Dry Lining: Metal Frame Components

voestalpine Metsec plc Dry Lining Division manufacture a full range of lightweight, non-load bearing metal frame components which can be found below. For full dimension, weight and pack size details please reference the Metsec Dry Lining Section Profiles Data Sheet within the downloads section of the website.

C Studs

Available in 50mm, 60mm,70mm, 75mm, 92mm & 146mm web sizes.

Various stock lengths.

Heavy Duty C Stud

Available in 70mm web sizes.

Various stock lengths.

Acoustic Stud

Available in 70mm & 92mm web sizes.

Various stock lengths.

I Studs

Available in 50mm, 60mm,70mm, 92mm & 146mm web sizes

Various stock lengths.

Tracks

Available in Standard (25mm & 32mm leg) Deep (50mm leg) and extra Deep (70mm leg) variants.

Base width 2mm wider than stud being used.

3m stock lengths

Resilient Bar

Available in 3m stock lengths.

Partition Brace & Flat Strap

PB24 available in 2.4m stock lengths.

FS24 available in 2.4m stock lengths.

Wall / Ceiling Liner (WL507)

WL507 (Wall Liner) various stock lengths.

WL60 (Perimeter Track) available in 3m stock lengths.

MF (Metal Furring) Ceiling

SMF5 (Top Hat) available in 3.6m stock lengths.

SMF6a (Perimter track) available in 3.6m stock lengths.

SMF7 (Primary Channel) available in 3.6m stock lengths.

Angles

25mm x 25mm, 25mm x 50mm & 50mm x 50mm variants.

Various stock lengths (dependent on size).

Sub Grid Sections

19mm x 38mm x 19mm, 63mm x 25mm x 63mm & 100mm x 50mm x 100mm variants.

Various stock lengths (dependent on size).

Clamping Strip

Various stock lengths.

Spring Tee Section

SST01 (Spring Tee) available in 3.6m stock lengths.

CF01 (Perimeter Trim) available in 3.6m stock lengths.