Components & Accessories

Metsec Framing provides a one-stop-shop for your framing solutions by offering a full range of accessories to compliment the framing sections. These include cleats, zed bars and cantilever posts. All Metsec accessories are covered by Metsec’s Product Warranty and £5M Design Warranty.

  • C Sections

    Used as studs in wall panels and joists in floor/roof panels.

    C Section Dimensions

    Section Reference Area cm2 Weight kg/m D mm F mm L mm t mm Cy cm lxx cm4 lyy cm4
    70M15 2.31 1.83 70 35 10 1.5 1.21 18.3 3.92
    100M12 2.75 2.14 100 53 14 1.2 1.84 45.9 11.07
    100M15 3.45 2.67 100 54 14 1.5 1.88 57.4 14.21
    100M20 4.6 3.56 100 55 15 2 1.92 76.1 19.21
    100M23 6.04 4.67 100 71 16 2.3 2.64 104.6 41.4
    100M29 7.67 5.83 100 72 16 2.9 2.71 131.1 53.58
    100M30 10.56 8.26 100 110 22 3 4.65 192.3 172.1
    150M12 3.37 2.64 150 55 13 1.2 1.56 118.3 13.44
    150M15 4.23 3.37 150 56 13 1.5 1.60 148.2 17.24
    150M20 5.64 4.47 150 57 13 2 1.64 196.8 23.31
    150M30 8.76 6.83 150 62 15 3 1.89 306.9 42.82
    200M12 3.97 3.13 200 55 13 1.2 1.34 232 14.59
    200M15 5.28 4.18 200 65 14 1.5 1.7 319.6 27.71
    200M20 7.08 5.56 200 67 14 2 1.77 428.8 38.82
    200M30 10.56 8.26 200 69 14 3 1.89 639.3 59.6
    250M16 6.55 5.11 250 68 15 1.6 1.62 594.5 35.78
    250M20 8.16 6.38 250 68 15 2 1.62 736.9 43.86
    300M20 8.8 6.97 300 59 15 2 1.2 1060.3 32.22
    300M29 12.83 10.1 300 62 15 2.9 1.3 1548.3 50.35
  • Channels

    Used as tracks on the top and bottom of wall panels and ends of floor/roof panels.

    Channel Dimensions

    Section Reference Area cm2 Weight kg/m D mm F mm L mm t mm Cy cm lxx cm4 lyy cm4
    74M12 1.82 1.47 74 40 0 1.2 1.08 16.4 2.99
    74M20 4 3.26 74 65 0 2 2.15 39.4 18.18
    104M12 2.71 2.14 104 62 0 1.2 1.73 49.8 10.96
    104M15 3.38 2.67 104 62 0 1.5 1.74 61.7 13.6
    104M20 4.52 3.56 104 63 0 2 1.8 82.2 18.7
    108M30 6.78 5.35 108 62 0 3 1.77 129 26.5
    154M12 3.33 2.64 154 63 0 1.2 1.46 123.1 12.88
    154M20 5.64 4.47 154 66 0 2 1.6 208.7 23.96
    158M30 8.7 6.83 158 69 0 3 1.72 336.4 40.03
    204M12 3.93 3.13 204 63 0 1.2 1.25 237.4 13.88
    204M20 6.96 5.56 204 74 0 2 1.63 435.2 35.55
    208M30 10.38 8.26 208 72 0 3 1.59 659.8 48.66
    254M12 3.93 3.13 254 38 0 1.2 0.49 305 3.47
    254M20 8 6.38 254 79 0 2 1.59 762 45.13
    304M16 6.41 5.11 304 53 0 1.6 0.75 750.6 12.25
    304M20 8.72 6.97 304 68 0 2 1.13 1070.1 30.86
    306M29 12.65 10.1 306 68 0 2.9 1.16 1559.5 43.94

    Slotted head track is available on certain gauges for the 104mm, 154mm and 204mm sections using an ‘S’ suffix.

  • Angles

    Used for various arrangements to provide additional or temporary support.

    Angle Dimensions

    Section Reference Area cm2 Weight kg/m F mm t mm
    45x45x2.0 1.76 1.38 45 2.0
    100x100x2.0 3.96 3.11 100 2.0
  • Straps

    These are available to use as bracing members when screw fixed to the face of panels.

    Strap Dimensions

    Section Reference Area cm2 Weight kg/m D mm t mm
    38VB09 0.34 0.27 38 0.9
    90VB12 1.20 0.85 90 1.2
  • Continuous Walling and Dead Load Cleats

    Continuous Walling and Dead Load Cleat Dimensions

    Continuous walling cleats (slotted)

    3m thick - Ref. CW1303 x (100 - 300) or CW1903 x (100 - 300)
    6m thick - Ref. CW1306 x (100 - 300) or CW1906 x (100 - 300)

    Dead Load Cleats (no slots)

    3m thick - Ref. DL1303 x (100 - 300) or DL1903 x (100 - 300)
    6m thick - Ref. DL1306 x (100 - 300) or DL1906 x (100 - 300)

  • Cantilever Posts

    Cantilever Post Dimensions

    Ref. CP705050

  • High Load Cleats

    High Load Cleat Dimensions

    Slotted - Ref. HS903
    Plain - Ref. HL903

  • Zed Bars

    Zed Bar Dimensions

    Ref. Z402
    Supplied in 600mm lengths

  • Slotted Angle

    Slotted Angle Dimensions

    Ref. SA1002
    Supplied in 1000mm lengths

All cleats, zed bars and slotted angles are manufactured from pre-hot dipped galvanised steel.