Mezzanine Floor Cleats

Cleat Specification

Standard and non-standard cleats can be supplied for inset (web) floor constructions.

Standard inset cleats are manufactured from 4mm and 5mm pre-hot dipped galvanised steel, Z275 coating, guaranteed yield strength 350 N/mm2. Non-standard cleats by others or to special order.

All holes are 18mm diameter for M16 bolts grade 8.8.

Non-standard cleats can be supplied for oversail (top) floor construction to special order.

  • Mezzanine Inset (Web) Cleats

    Section
    series
    C
    (mm)
    D
    (mm)
    N
    (mm)
    Max Weight
    (kg)
    MIC 142 4/5 60 110 16.0 0.91
    MIC 150 4/5 60 110 20.0 0.91
    MIC 165 4/5 70 120 22.5 0.99
    MIC 172 4/5 70 120 26.0 0.99
    MIC 202 4/5 100 150 26.0 1.24
    MIC 220 4/5 100 150 35.0 1.24
    MIC 232 4/5 130 180 26.0 1.48
    MIC 262 4/5 160 210 26.0 1.73
    MIC 302 4/5 200 250 26.0 2.06
    MIC 342 4/5 240 290 26.0 2.39

    The Mezzanine inset cleat reference is the same as the section that it is being used in conjunction with, i.e:

    MIC 1724 - 4mm thick inset cleat for a 172 section

    MIC 2325 - 5mm thick inset cleat for a 232 section

    Mezzanine Floor Inset Cleat Connection Detail

    Mezzanine Floor Inset Cleat Detail

  • Mezzanine Oversail (Top) Cleats

    Section series A (mm)B (mm) C (mm) Weight (kg)
    MOC 142 49 60 134 0.71
    MOC 150 53 60 138 0.72
    MOC 165 55 70 150 0.76
    MOC 172 59 70 154 0.78
    MOC 202 59 100 184 0.89
    MOC 220 68 100 193 0.92
    MOC 232 59 130 214 1.00
    MOC 262 59 160 244 1.11
    MOC 302 59 200 284 1.25
    MOC 342 59 240 324 1.40

    Mezzanine Oversail (Top) Cleat Detail