Purlin and Side Rail Cleats

Metsec standard purlin cleats are suitable for all normal applications on purlins and side rail systems.

For abnormal loadings in tiled roof/steep slopes, cleats should be stiffened.

Special cleats can be supplied by arrangement.

  • Series 142-262 Weld-on Cleats

    Series 142-262 weld-on cleat detail

    All holes 18mm diameter

    * Variable height cleats can be supplied if required.
    Dimension B = 142 maximum

    Cleat ref. A B* C
    142 130 50 56
    172 160 50 86
    202 190 50 116
    232 220 50 146
    262 250 50 176

    Available Finishes

    1. Black bare metal
  • Series 142-262 Bolt-on Cleats

    Series 142-262 bolt-on cleat detail

    All holes 18mm diameter

    * Variable height cleats can be supplied if required.
    Dimension B = 142 maximum

    Cleat ref. A B* C D E F
    142 130 50 56 35 65 6
    172 160 50 86 35 65 6
    202 190 50 116 35 65 6
    232 220 50 146 35 65 8
    262 250 50 176 35 65 8

    Available Finishes

    1. 6mm pre-galvanised
    2. 8mm hot dipped galvanised
  • Series 302 and 342 Weld-on or Bolt-on Cleats

    Series 302 and 342 weld-on or bolt-on cleat detail

    All holes 18mm diameter

    * Variable height cleats can be supplied if required.
    Dimension B = 142 maximum

    Cleat ref. A B* C D E F
    302 280 60 195 40 75 8
    342 320 60 235 40 75 8

    Available Finishes

    1. Black bare metal for welding or bolting
    2. Hot dipped galvanised for bolting
  • Trimmer Cleats

    Trimmer Cleat Detail

    All trimming cleats are 3mm galvanised steel, suitable for compatible depths of Z-section and C-section, i.e. 202. Z. to 202. C. etc

    Cleat ref. A B C D
    TC 142 126 56 100 96
    TC 172 136 86 130 106
    TC 202 136 116 160 106
    TC 232 142 146 190 112
    TC 262 146 176 220 116
    TC 302 156 195 239 126
    TC 342 166 235 279 136